(a) For circuits used for transporting electric power, a low power factor implies large power loss in transmission. Explain.
(b) Power factor can often be improved by the use of a capacitor of appropriate capacitance in the circuit. Explain.
Answer
631.8k+ views
Hint: The transmitting power is proportional to the power factor. The power loss in the circuit is proportional to the square of the current in the circuit. Find out what will increase if there is a small power factor. The power factor can be improved by keeping the resistance and impedance the same.
Complete step by step answer:
(a) We have, the transmission power at a given voltage is expressed as,
\[P = IV\cos \phi \] …… (1)
Here, I is the current, V is the voltage and \[\cos \phi \] is the power factor.
If there is no power loss in the transmission, the power factor becomes 1. But, there always be the power loss in the transmission and the power loss in the transmission is given as,
\[{P_{loss}} = {I^2}R\]
To transmit the given power, if \[\cos \phi \] is very small, the current should be increased.
Therefore, if the current is increased, from the above expression, the power loss will also increase.
(b) We have the power factor is the ratio of the resistance to the impedance of the transmission line.
\[\cos \phi = \dfrac{R}{Z}\]
Here, R is the resistance and Z is the impedance.
The power factor will improve if \[\cos \phi \to 1\]. Therefore,
\[1 = \dfrac{R}{Z}\]
\[ \Rightarrow R = Z\]
We have the expression for the impedance of the transmission line,
\[Z = \sqrt {{R^2} + {{\left( {{X_L} - {X_C}} \right)}^2}} \]
Here, \[{X_L}\] is the inductive reactance and \[{X_C}\] is the capacitive reactance.
As we have discussed earlier, the power factor will improve when the impedance equals the resistance of the transmission line. From the above expression, the impedance will be equal to resistance when \[{X_L} = {X_C}\].
Thus, the power factor can be improved by choosing the capacitance such that its capacitive reactance equals the inductive reactance.
Note:Students must understand the difference between capacitance and capacitive reactance. The capacitance is the ability of the capacitor to store the charge and the capacitive reactance is the resistance to the AC supply by the capacitor. We can never reach the power factor equal to 1 in practice. There is always a power loss in the transmission.
Complete step by step answer:
(a) We have, the transmission power at a given voltage is expressed as,
\[P = IV\cos \phi \] …… (1)
Here, I is the current, V is the voltage and \[\cos \phi \] is the power factor.
If there is no power loss in the transmission, the power factor becomes 1. But, there always be the power loss in the transmission and the power loss in the transmission is given as,
\[{P_{loss}} = {I^2}R\]
To transmit the given power, if \[\cos \phi \] is very small, the current should be increased.
Therefore, if the current is increased, from the above expression, the power loss will also increase.
(b) We have the power factor is the ratio of the resistance to the impedance of the transmission line.
\[\cos \phi = \dfrac{R}{Z}\]
Here, R is the resistance and Z is the impedance.
The power factor will improve if \[\cos \phi \to 1\]. Therefore,
\[1 = \dfrac{R}{Z}\]
\[ \Rightarrow R = Z\]
We have the expression for the impedance of the transmission line,
\[Z = \sqrt {{R^2} + {{\left( {{X_L} - {X_C}} \right)}^2}} \]
Here, \[{X_L}\] is the inductive reactance and \[{X_C}\] is the capacitive reactance.
As we have discussed earlier, the power factor will improve when the impedance equals the resistance of the transmission line. From the above expression, the impedance will be equal to resistance when \[{X_L} = {X_C}\].
Thus, the power factor can be improved by choosing the capacitance such that its capacitive reactance equals the inductive reactance.
Note:Students must understand the difference between capacitance and capacitive reactance. The capacitance is the ability of the capacitor to store the charge and the capacitive reactance is the resistance to the AC supply by the capacitor. We can never reach the power factor equal to 1 in practice. There is always a power loss in the transmission.
Recently Updated Pages
What is BLO What is the full form of BLO class 8 social science CBSE

Explain the Treaty of Vienna of 1815 class 10 social science CBSE

10 examples of friction in our daily life

Draw a diagram of nephron and explain its structur class 11 biology CBSE

Write structures of the following compounds i 2 Chloro3methylpentane class 11 chemistry CBSE

A Paragraph on Pollution in about 100-150 Words

Trending doubts
Draw a labelled sketch of the human eye class 12 physics CBSE

Which are the Top 10 Largest Countries of the World?

Differentiate between homogeneous and heterogeneous class 12 chemistry CBSE

Draw ray diagrams each showing i myopic eye and ii class 12 physics CBSE

Which is the correct genotypic ratio of mendel dihybrid class 12 biology CBSE

What is the Full Form of PVC, PET, HDPE, LDPE, PP and PS ?

